Top 10 Best Benchtop Belt Sanders Review in 2020

Best Benchtop Belt Sanders

Best Benchtop Belt Sanders

If you are an avid woodworker who works with woods and splinters, you know the importance of sanding and providing a nice final finishing on the piece. When it comes to sanding tools, you can rely on benchtop belt sanders to provide most effective output possible. DIY experts and professionals both use this tool to get their work done efficiently due to the combination of belt and disc in one tool. Information about ten of the best benchtop belt sander tools from the market are assembled here.

Our best suggestion would be the Belt Disc Sander from BUCKTOOL, especially if you are looking for the one which could take on big projects with easy belt changing capability and does not generates much noise as well.

Our Top 10 Benchtop Belt SandersReview

Take a look at our top 10 benchtop belt sanders review for finding the best benchtop belt sander of your choice. An in-depth review which includes all the information that you would need starting from tool build, belt and disc sizes, moto capacity and speed to dust management system with other cues in between. This is put together to provide you with the best data about benchtop belt sanders.

 After going through the review, if you still can’t make a decision on which one to choose, our devised buying guide has assembled all the necessary aspects that you may look for when buying the best benchtop belt sander.

BUCKTOOL Belt Disc Sander


  • Material: Iron
  • Weight: 33.8 lbs
  • Dimensions: 22.05 x 19.84 x 9.76 inches
  • Motor: 5-Amp
  • Power Source: Corded Electric

If you’re looking for a 2-in-1 sanding machine with a base of sturdy cast aluminium, then this Belt Disc Sander from Bucktool can be the ideal one for you.

Driven directly by motor shaft, the sanding belt and disc are maintenance-free. Plus, say goodbye to the belt tension adjustment and damage belt change. It has also got rubber foot which will prevent any kind of vibrations.

Being designed as a motor direct-drive, its sanding efficiency is increased by 25% in comparison to the traditional ones.

Bucktool Belt Disc Sander adheres to the CSA standards. It has total enclose induction motor supplies which provides silent and powerful performance with maximum developed 3/4 HP. This helps in delivering a belt speed of 2162 FPM and disc speed of 3450 RPM.

You can tilt the belt from 0 to 90 degrees whether it’s for horizontal or vertical sanding and however you need it per your project. You could also sand curved work-pieces with its driven drum.

 It includes a 4” x 36” belt and 6” disc. Plus, you adjust the angle of the work table on the sanding disc included with a miter gauge.


  • Has belt changing capability with ease.
  • Could handle large sanding projects without any issue.
  • Low sound and noise level.


  • Does not include a dust collector
  • Rubber foot under the belt sander does not last for long time.

Porter-Cable PCB420SA Belt with Disc Bench Sander


  • Material: Metal
  • Weight: 51.1 lbs
  • Dimensions: 23 x 16 x 23.5 inches
  • Size: 4” x 36”
  • Motor: Ball bearing 3/4 HP induction
  • Power Source: Corded Electric

If you’re a professional in the line of woodwork and looking to change the belt of a sander without any effort, the PCB420SA belt with 8” Disc Bench Sander will meet your demands.

Its belt tension control comes with a quick release. What’s more beneficial is that you could adjust the single knob belt tracking which allows you with alignment of fine-tune belt.

Known for swift and skilled disc sanding, it is powered by ball bearing motor of 3/4 HP induction. So, it is able to provide a speed of 3,450 RPMS in case of the belt and 2,160 FPM in case of the disc.

The built-in dust port along the bag will help keep your work area sawdust-free effectively.

 For accurate belt and disc sanding, it includes 2 large, die-cast aluminium tables which could be tilt from 0-45 degrees. Both of these tables also have a fitting miter gauge to allow ultra-careful angle cuts.


  • Is heavy weight, powerful and has heady duty motor.
  • Contains a well dust blower fan
  • Causes less vibration on the bench.


  • The disc sander table could slip at times.
  • Dust collection bag might not be durable in long run.

         Grizzly Industrial H6070 Belt/Disc Combo Sander


  • Weight: 0.16 ounces
  • Dimensions: 12.5 x 16.7 x 11.5 inches
  • Motor: 1/3 HP, 110V, single-phase, 3450 RPM

Now there are some portable sanders which can help you get some serious woodwork done. The H6070 – 1” x 30” Belt/5” Disc Combo Sander from Grizzly Industrial is a combination benchtop sander of such type.

It comes with a 1” wide x 30” long belt sander as well as a 5” disc sander.

This sander is perfect for sanding complex parts and contour sanding as well as dry sharpening. This is possible due to the motor power of 1/3 HP which can deliver a speed of 3450 RPM. It could handle everything.

You could tilt the table to a 45-degree angle providing the flexibility you need for your work.

Contour sanding could be a piece of cake with the H6070 as it includes an idler roller guard and a removable belt platen.


  • Affordable, handy, and portable sander.
  • Does not move or slip when placed on bench.
  • Provides adjustable table for belt and disc sander.


  • Clamp lever for the belt sander could break due to poor quality if not handled with care.
  • Difficulty in changing disc pad due to dust cover.

Jet Tools – J-4002 Bench Belt and Disc Sander


  • Material: Metal
  • Weight: 63 lbs
  • Dimensions: 22 x 21 x 14 inches
  • Size: 42”
  • Motor: 1/3 HP, 115-VAC, 1 ph
  • Power Source: Corded Electric

Every woodworker might have the dream to provide the perfect finishing on their work every time. On the same time, making it superior as well. If you’re the same person, then what you need is theJ-4002 1” x 42” Bench Belt and Disc Sander from Jet.

 Having a robust and flexible build, this sander is capable of doing jig saw work, coping saw work, and material removal of a hand file. This is possible to the coarse belt unit of the sander.

It is powered by a motor of 1/3 HP, 115VAC, and 1ph and comes with an attached idler wheel cover. It also yields a belt speed of 3,000 SFPM and disc speed of 1,725 RPM.

Carving, drum sanding, smoothing could be easily done with this sander’s power start. It also has a deluxe miter gauge for turning and locking the common angles to 45 degrees, either to right or left.


  • Well quality build.
  • Has easy setup process.
  • Is lightweight so you could move it around. 


  • Sand disc mounting could be a bit troublesome.
  • Might have issues with the motor in case of defective sanders.

                 RIKON Power Tools 50-151 Belt with Disc Sander


  • Material: Steel
  • Weight: 18 lbs
  • Dimensions: 15 x 12.63 x 14.63 inches
  • Size: 1” x 30”

Now, let’s take a look at the 50-151 Belt with 5” Disc Sander from RIKON Power Tools. If you got a hobby of crafting on small projects such as – your home decor, repair work, or furniture crafting, then this sander could be the ideal one for you.

Made for light-duty use, you will find that the sander’s small motor is well capable of driving its belt and disc.

You will be able to tilt the belt table from 0 to 45 degrees. This sander also includes a belt tracking knob as well.

Plus, you won’t have to worry about the dusts because of the 2” dust port included with it. It also has a safety on/off switch so you could ease down a little bit on safety.


  • Long lasting material build.
  • Separate dust ports for belt and disc.
  • Super friendly adjustable support tables.
  • Does not cause that much noise.


  • Might have turning issues with adjustment knob.
  • Fast belt speed for sanding or sharpening which could generate heat.
  • The miter gauge might not fit in the track properly.

Ridgid EB4424 Sander, Oscillating/Edge Belt


  • Material: Plastic
  • Weight: 0.01 ounces
  • Dimensions: 23 x 19 x 19 inches
  • Motor: 3/8 HP, 5-Amp
  • Power Source: Corded Electric

Being ahigh-performance tool and providing 2-in-1 machine facilities, EB4424 sander with oscillating/edge belt from Ridgid could meet your demands and be your choice. That is, if you are looking for a power-detail-sander.

Combining the edge belt and spindle sanding together, this sander’s even operation and durable life is ensured with ball bearing construction.With transmission at 1,725 spindle r/min and belt speed of 1,350 FPM, oscillation is 60/minute.  

Getting quick, smolder-free finishes on the edges, surfaces, contours, plus the inside and outside contours has become effortless with its oscillating and spinning movement.

Without requiring any tools, belt to spindle change conversions are done swiftly and without any hassle. The table could be tilt from 0 to 48 degrees.

Plus, you could utilize detents at 0, 15, 22.5, 30, and 45 degrees in order to sand the bevel edges.


  • Provides uncomplicated conversion from belt to spindle sander.
  • Has outstanding flexibility and reliability.
  • Provides better control and safety.


  • The motor could burn if used at a stretch.
  • The motor might turn off at times.

JET J-41002 ¾ Horsepower Bench Belt and Disc Sander


  • Weight: 60 lbs
  • Dimensions: 23.1 x 16.7 x 16 inches
  • Motor: 3/4 HP, 115 Volt, 1 phase
  • Power Source: Corded Electric

J-41002 2” x 42” HP Bench Belt and 8” Disc Sander is another. yet a great belt and disc sander from Jet. It’s almost the same thing as the J-4002 1” x 42” Bench Belt and Disc sander.

Its flexible design is built to deliver an exceptional job on the finishing. You will be able to sand, grind, and give a finishing to the outside curves or odd-shaped items.

This cast constructed sander has a heavy-duty base which also includes a cast-iron tilting table. Also, finish your 2-in-1 material removal and finishing work with the abrasive belt unit that comes along with the J-41002.

The single-phase motor runs at 3/4 HP with 115-volt and produces a belt speed of 3,100 SFPM and disc speed of 3,450 RPM.

Being able to turn and lock for the usual angles up to 45 degree left and right, its deluxe miter gauge is another considerable feature as well.

Lastly, it has a dust deflector which you could adjust to your needs and a dust chute along with rubber feet to prevent any vibrations.


  • Can provide smooth sanding experience.
  • Causes less vibrations with the rubber feet.
  • Setup process will be effortless.


  • Could cause difficulty in changing the belts.
  • The platen might bend if pressure is placed.

Rockwell Belt/Disc Combo Sander


  • Material: Metal
  • Weight: 41 lbs
  • Dimensions: 13 x 11 x 22 inches
  • Motor: 4.3-Amp
  • Power Source: Corded Electric

Make your woodwork easier with the Belt/Disc Combo Sander from Rockwell. This sander is made to deliver the best result to you every time that you work on it.

It has got a belt platform that you could adjust from 0 to 90 degrees for both sanding horizontally and vertically. It includes a sanding table that can be adjusted for sanding on the beveled edges in between 0 to 45 degrees.

Equipped with an induction motor of 4.3 amp which could handle your heavy-duty work, this sander will allow you to do your work flawlessly. You could totally rely on this machine.

What’s best about this sander is, that after completing few projects you could use this sander as strongly as the first time. This is possible due to the long-lasting and systematic built.


  • Provides swift and low-noise working experience.
  • Will cause no trouble with usage.
  • Easy to set-up.


  • Might cause issues with belt durability.
  • Belt sander might slip with pressure.

                  WEN 6515T Belt Sander with Sanding Disc


  • Weight: 16 lbs
  • Dimensions: 11.5 x 11.5 x 15.5 inches
  • Motor: 2.3 Amp

Who does not like to work on a sander which does not cause hassle? Hassles such as the belt sander slipping away or the fact that it does not stay fixed at a place. But now say goodbye to those as we present the two-in-one 6515T 1” x 30” Belt Sander with 5” Sanding Disc from WEN.

Built with a brawny design to do your heavy-duty work, it has got the right kind of base to prove it. Powered by 2.3A motor, it delivers up to a speed of 3160 FPM in case of the belt and 3450 RPM in case of the disc.

It will help you reach and sand the places that are often hard to reach. It will easily level up your wood’s barbed edges and splinters. Sand to your heart’s desire.

To ensure maximum vacuuming productivity it contains two separate dust ports.

You could also easily move it from one place to another. It also has a miter gauge, an 80-grit sanding disc, and a 100-grit sanding belt.


  • Strong build with durable belt quality.
  • Produces less noise when operating.
  • Has significant motor power.


  • Belt changing and tracking could be grueling.
  • Could cause difficulty while setting up the belt table.

WEN 6502T Belt and Disc Sander with Cast Iron Base


  • Material: Metal
  • Weight: 37.4 lbs
  • Dimensions: 22 x 11 x 12.5 inches
  • Motor: 4.3 Amp

Now if you’re looking for one flexible and dependable sander, let’s look at 6502T 4.3-Amp 4” x 36” Belt and 6” Disc Sander with Cast Iron Base, another functional one from WEN.

It can sand all your rough edges even and does a fine job on wooden and lumber splinters as well. It is driven by 4.3-amp motor of 1/2 HP which could be hefty. So, adjusting the power by anticipating your needs could come in handy here.

What’s more astounding is that you will be able to change the belt without any struggle. This will make your work more efficient as you won’t have to spend any time to replace the sand paper grits.

To make your working experience sublime, the belt is made to tilt in between 0 to 90 degrees. Plus, there will be no vibrations thanks to the heavy cast-iron base.


  • Good quality sanding table
  • High-quality build.
  • Changing belts on the belt sander is very easy.


  • Dust control is not optimum.
  • Could cause motor issues when switching on. 

Choosing The Right Benchtop Sander of Your Needs:

If you are still confused after all these reviews, then stick with us for a bit longer. We will help you find theright one by looking at the following aspects when buying a benchtop sander-

Motor Capacity:

Coming with 5-Amp motor power, Belt Disc Sander from BUCKTOOL or EB4424 Sander with Oscillating/Edge Belt with from Ridgid could be your choice if you’re looking to work on some heavy-duty projects.

However, motor having 4-Amp motor capacity could be more than enough for most sanding works.

Belt/Disc Speed:

High-speed sander allows quicker removal of materials. Locking the average good speed around 1,500 RPM approx. or at the least 2,300 SFPM, you could go for the J-4002 1” x 42” Bench Belt and Disc Sander from Jet Tools.

Belt Measurement:

Just keep two things in your mind. Firstly, long belts give you long working lifespan so you don’t have to buy replacement belts that much. Secondly, the wider the belt, the larger workpieces you will be able to sand. If you consider 4” x 36” to be an ideal measurement here, you could go for the 6502T 4.3-Amp Belt and Disc sander from WEN.

Weight, Build, and Disc Sander:

If you want less vibrations during your work, you should consider going for one weighing more than 30 lbs. Build quality also matters here, so one made of steel or cast iron could your perfect choice rather than plastic or aluminium at all. The J-41002 Bench Belt and Disc Sander from JET could grab your attention here.

Another thing is even if you only get a belt sander tool, it can’t replace a disc sander and goes the same for the other way around. Best thing would be to get both-in-one tool so that you could utilize the most out of your sander.

Belt Disc sander from BUCKTOOL could be an optimum choice in this regard.

Dust Control System and Dust Bag:

Now for the final thing- when you go sanding, it is bound to produce hell lot of a sawdust. It’s something that you should not inhale if you want to keep your lungs healthy. So again here, you could go for a belt/disc sander combination. You could rely upon most tools with this combination to get your work done.

Best tools of this kind are the 6515T 1” x 30” Belt Sander with 5” Sanding Disc from WEN and the 50-151 Belt with 5” Disc sander from RIKON Power Tools.


Should I purchase a belt/disc sander combo?

A benchtop sander with this combo will definitely meet your demands if you need both of its sanding services to save your money and workshop space.

Could benchtop sander be used for sanding non-wooden materials?

Yes, it could. However,there are handheld sander for those jobs.

Could a benchtop sander be placed and used on any surface?

Yes,it could as long as the surface is stable and can withhold the vibrations.

Could benchtop sander be used for working indoors?

Yes,but there could some limitations to that. A separate room indoor with proper vacuum system in place could prove useful in this case along with all the safety gears.

Could I run any kind of materials with my benchtop belt sander?

Due to various kinds of sandpapers with different grits available, you will be able sand anything to your needs with the right one.

Final Word

Hope that you can now make a choice of your own to purchase the best benchtop belt sander out there. Just a piece of final advice before you buy- proper functionality is one of the important attributes that you should look for before getting a benchtop belt sander. Listed above were outstanding tools which are highly recommended. So best of luck finding the one meeting your anticipation.